7 Best Oscillating Tool Blades in 2023 - TheMostSpruce (2023)

Before oscillating blades purchasing, it’s important to find out the main purpose of these devices. The field of use determines not only the type of unit but also the materials it’s made of. Even the best oscillating tool blades for sewing will be relatively useless while grout removing.

Each user has to pay attention to the fact that the oscillating tools perform side-to-side movements. The swinging may be both subtle (almost 3 degrees) and quick (approximately 20 000 strokes per minute). As a result, the user has the feeling that the tool vibrates.

The way of working determines the types of oscillating tool blades, and among the whole diversity it’s important to discharge the most widespread edges:

  • Cutting blades become useful when there is a need to cut the wood, metal, and other hard/soft materials. These are the most often utilised and have varied degrees of endurance.
  • Sanding blades smooth the cutting tasks. The user does not have to expend any effort when utilising it.
  • Sawing units can cope not only with the wood but also with wood-containing materials (plywood, hardboard, and chipboard).
  • Polishing blades (made from felt or fleece) are able to accomplish the project’s final handling and polish it up. According to the information provided below, such tools are utilised in uncommon instances yet operate brilliantly.
  • Scraping edge removes various materials from surfaces. There are models for firm and soft materials.
  • Rasping oscillating saw blades are created to work with rough surfaces like wood or concrete. These pieces come in finger, round, and triangle shapes, and each one aids in reaching difficult-to-reach areas.
  • Grout removal fitments can be diamond-edged (for hard materials) or carbide-edged (for soft materials).

If you want to know who makes the best oscillating tool blades and buy the aforesaid cutting edges, you should consider the blade material and select a sturdy kind for difficult jobs, a thinner type for wood cutting, and so on. Check out oscillating tool blade reviews because mentioned products have various grades of compatibility with tools and its important to prefer the proper unit.

Oscillating Blade Reviews

Jump to

  • Vtopmart USVM01001
  • PECHAM ‎PE-24
  • Dewalt DWA4216
  • Bionso ‎de-Wristband-08h-959
  • WorkPro W124052A
  • WorkPro W124066A

Vtopmart USVM01001 — Best Multi-Tool Blades

7 Best Oscillating Tool Blades in 2023 - TheMostSpruce (1)
The set of multi-tool blades is packed with 20 quick-release pieces made of alloy steel. They produce both high-end and budget-friendly equipment, compatible with multiple brand leaders. There are 6 modifications of units in the box, providing ample opportunities for their application. Each piece or a couple of them serves specific purposes.

Three 1.37 and three 1.75-inch blades are designed for various kinds of steel and mixed metal surfaces and parts. Of course, it deals only with soft materials since no budget tool can cope with the hard ones. Two pairs of 1.37 and three 1.75-inch pieces are to cut both wood and plastic. In my experience, it works wonders with nylon and acrylic, but I wouldn’t count on its fast work on oak ash. The last three 1.75-inch and four 1.37-inch units in the set are more versatile, being suitable for all the materials mentioned above.

All of them have sturdy teeth. They feature a decent thickness and are tough enough to be robust but not crumbling. Of course, they cannot last as long as the branded tools. However, the set is a reasonable solution for house projects.

In the multi-tool blades review, I’d like to appreciate the metric and inch scale on both sides of each item to ensure precise cuts. The entire pack’s sizes are 6.4 x 4.6 x 1.8 inches, and its weight is 1.1 pounds.

(Video) Best Oscillating Multi-Tool? FLEX vs Milwaukee, DeWalt, Makita, Ryobi, Ridgid, Hart, Metabo, Warrior


  • The teeth are long and wavy to work faster, making clean cuts.
  • The set comes in a plastic box to keep all its contents in one place.


  • The mounting holes can be a bit sloppy and thin. It requires some effort to hook them up to some oscillating tools.
  • A bimetal blade goes through the screw only once before it loses sharpness or even breaks down.
Video Vtopmart USVM01001


7 Best Oscillating Tool Blades in 2023 - TheMostSpruce (2)
The PECHAM PE-24 blades are a versatile set of blades that can tackle a variety of cutting tasks. These oscillating tool blades are designed to fit most oscillating tools and feature a quick-release mechanism that makes swapping out blades a breeze.

One of the standout features worth mentioning in this oscillating tool blades review is their durability. They are made from high-quality materials that can withstand heavy use and resist wear and tear over time. This makes them an excellent choice for both professional contractors and DIY enthusiasts who need reliable and long-lasting blades.

In terms of performance, these blades are top-notch. They can cut through wood, metal, plastic, and other materials with ease, thanks to their sharp teeth and precise design. The variety of blade shapes and sizes also ensures that you can find the perfect blade for any job.


  • The diverse range of these blades renders them an excellent option for any DIY enthusiast.
  • The combination of quantity and quality in the blades provided makes it challenging to find a better deal!
  • The items arrived well-packaged in sturdy boxes and were individually wrapped.

(Video) Have Makita Made The Ultimate Multitool?


  • I faced a single problem whereby the semi-circular blades didn’t fit snugly on the Dewalt saw. Although Dewalt’s universal mounting screw could still be used, the lack of a quick-release feature was extremely bothersome.

Dewalt DWA4216 — Best Oscillating Tool Blades for Nails

7 Best Oscillating Tool Blades in 2023 - TheMostSpruce (3)
The Dewalt oscillating tool blades are designed for multi-tools. The set includes 2 blades for wood cutting/nails pulling and 3 for wood fast cutting, flush slitting, and scrapping. Each of them can be used for universal oscillating tools and a special case helps keep all of them in one place. The kit weighs only 1.2 pounds so can be allocated on a shelf in a garage or storeroom. These blades are very strong, they don’t break even after falling or humming blow. Metal accessories are able to withstand both high and low temperatures, they don’t cover up with corrosion.


  • The entire cunnings are clear and straight.
  • These best oscillating tool blades for Dewalt are made of reliable material and can cope with heavy loads.
  • The installation performs quickly.


  • The blades are thin and that’s why they don’t fit the Dremel MM45.

Bionso ‎de-Wristband-08h-959 — Best Oscillating Tool Carbide Blades

7 Best Oscillating Tool Blades in 2023 - TheMostSpruce (4)
The Bionso 35 PCS oscillating multi-tool blades set is an excellent addition to any DIY enthusiast or professional contractor’s tool kit. The blades are made from high-quality materials that ensure durability and longevity, making them ideal for various cutting and trimming tasks.

This set includes a wide range of blade types and sizes, including semi-circular saw blade for cutting wood and drywall, bi-metal, high-carbon steel, and stainless-steel blades, allowing for precision cutting through different materials such as wood, metal, and plastics. The set also comes with a handy storage case, making it easy to organize and access the blades when needed.

What sets the Bionso ‎de-Wristband-08h-959 apart from other brands is the versatility they offer. The blades are compatible with most popular brands of oscillating tools, including Dewalt, Porter-Cable, and Bosch, ensuring you can use them on different machines.

Overall, the Bionso blades set is a great investment for anyone who wants to tackle a range of cutting and trimming tasks and can be considered the best oscillating saw blades. The variety of blade types and sizes, coupled with their compatibility with different oscillating tools, make this set a must-have for DIY enthusiasts and professionals alike.

(Video) What Nobody Will Tell You About Oscillating Multi-Tools


  • It worked perfectly for eliminating some construction adhesive.
  • I appreciate the extensive selection of blades for diverse tasks that I might encounter. They seem to be durable and long-lasting.


  • The case is of poor quality that it had already broken upon delivery.
  • Although they wear out quickly, they are reasonably priced and suitable for their cost.


7 Best Oscillating Tool Blades in 2023 - TheMostSpruce (5)
The PECHAM E-ALL is a versatile and reliable set of blades that can handle a wide range of tasks. With a variety of blades included in the set, it offers an excellent value for its price.

The blades are made of high-quality materials, which ensure their durability and longevity. They are designed to fit most oscillating multitools in the market, making them a great addition to any toolkit. The quick release mechanism is also very convenient, making it easy to change blades quickly and efficiently.

The blades offer a clean and precise cut on different materials, including wood, metal, plastic, and drywall. They also provide excellent control and maneuverability, making them the best oscillating blades for intricate and detailed work.

Overall, the PECHAM oscillating tool blade is an excellent investment for both professionals and DIY enthusiasts who require a versatile and reliable set of blades for their projects.


  • The selection of blades caters to a variety of projects, ranging from coarse cuts to fine, precise cuts.
  • Considering its price, it offers great value for money.


  • It’s worth noting that a circular blade is not included in the package.
  • The bi-metal blades are not very effective when cutting through wood that has embedded nails, as they tend to wear out quickly.

WorkPro W124052A

7 Best Oscillating Tool Blades in 2023 - TheMostSpruce (6)

(Video) Milwaukee M12 FUEL VS Milwaukee M18 FUEL (BEST NEW Oscillating Multi Tool Comparison)

The pack comes with 25 steel pieces that are designed for being connected to dozens of tools from the largest manufacturers. But it’s still necessary to check the product info before buying the kit, as it can be incompatible with some companies’ items or even other models of the same brands.

The kit has the best oscillating saw blades for various types of work with a wide range of different surfaces (steel, wood, tile, and plastic). The pieces feature good sharpness and make completely clean cuts. They can trim nails and screws trouble-free, as well as work on copper or aluminum parts. Their sizes vary from 0.62 to 3.5 inches.

A pair of 1.37-inch precision and two 1.37-inch standard pieces for wood cope with plunge cutting seamlessly. They boast excellent sharpness and work rather fast to not burn the wood. There is also a 2-inch rigid scraper in the box. It helps get rid of the rest of plywood, baseboard caulking, and other materials that are difficult to remove from the surfaces. A 2-inch flexible scraper is indispensable when it’s necessary to remove soft materials from hard-to-reach areas.

The pack also includes a 3.5-inch wood/drywall saw blade, a 1.5-inch semi-circle carbide piece, and a 1.37-inch triangular carbide grout one. The latter does its job by scraping caulking, rust, or concrete. All the blades work well for home projects (kitchen remodeling, for example) without dulling and broken teeth. The entire set’s dimensions are 13.27 x 7.64 x 1.73 inches, and its weight is 1.46 pounds.


  • The specially designed holes allow replacing items instantly, without extra tools and keys.
  • All the pieces are marked with a measurement scale in inches and millimeters.


  • No case comes with the set.
  • It would be great to get sandpapers with different levels of smoothness for a wider range of applications, from surface blending to heavy stock removal.

WorkPro W124066A

7 Best Oscillating Tool Blades in 2023 - TheMostSpruce (7)
These versatile 23 pieces are one of the best oscillating tool blades. The set comes with two pairs of 1.37-inch standard end-cut blades with 18 teeth and four 1.37-inch precision ones with 14 teeth for woodcutting. Besides, there are three 1.75-inch precision and three 1.75-inch standard items for cutting ends on wood. Three 1.37-inch bimetal and three 1.37-inch end-cut blades will work well with soft metals and wood. The pack also includes a pair of 3-1/2-inch bimetal semi-circular 18-tooth units for wood and metal, and one more piece of the same size for cutting wood and drywall. The items can cope with fiberglass and hardened fillers.

The tools’ finish protects them from rust that means their longer lifespan. All of them are made of high-quality materials, meaning BIM and Cr-V steel. The kit weighs 1.4 pounds with the dimensions of 11.81 x 5.91 x 1.57 inches.

(Video) 8 New Tools From Amazon Will Help You In Your DIY Projects


  • All the pieces of these potentially the best oscillating wood blades are sharp out of the box that provides absolutely clean cuts.
  • The tools feature excellent nail cutting ability.


  • The items go through large metal areas very slowly.
  • It would be great to see pieces for the hard metal in the set.


What are best multi-tool blades? ›

Best Multi Tool Blades comparison table
  • 1st Place. QAB35WB Antler 35mm Wood Cutter Saw Blades fits Dewalt Stanley Oscillating Multi Tool. ...
  • 2nd Place. Smart H8 mAK Trade 8 Piece Set Multi Tool Blade Set of 8. ...
  • 3rd Place. 24 PC Multitool Blades LEILUO Oscillating Saw Blades for Wood Metal Plastics Quick. ...
  • 4th Place. ...
  • 5th Place.

Are expensive multi-tool blades worth it? ›

Multi tool blades with diamond grit or carbide edges are typically more expensive, though worth it. They are capable of cutting through much tougher materials such as tile and grout and are often much more resistant and longer lasting.

How do I choose an oscillating tool blade? ›

A straight blade is best for plunge cuts, where you stab the blade into the surface. For long, linear cuts, use a round oscillating saw blade. You'll get cleaner cuts with the round blade if you make a shallow scoring cut first, then gradually deepen it with an oscillating saw.

What are the best blades for cutting metal? ›

For aluminum, an 8-10 TPI blade is best. As far as the best brand of metal cutting blade, we like MK Morse and Diablo. If you are cutting cast iron, stainless steel, and high-strength alloys, or for jobs like auto dismantling and fire & rescue, look for a carbide-tipped blade that is at least 8 TPI.

What are the sharpest blades you can buy? ›

Japanese Steel Or High-Carbon Steel

If cared for well, it can be the sharpest knife in your knife set with robust, resilient, and sturdy blades – Perfect to chop up some ginger or minced garlic.

Is a thicker blade better? ›

Generally speaking, the thickness of a knife will affect how strong it is, as well as, how cleanly it can cut. Thicker blades are more robust while thinner ones have a slimmer profile that supports smoother slicing.

Are Spider saw blades good? ›

Compared to some blades, Spyder does a much better job killing the vibration quickly, though I noticed that Diablo deadens it a little quicker. Still, it's a big advantage over most stock and cheap replacement blades. The low-friction coating is what some folks mistake as mere paint on a blade.

Are Starlock blades better? ›

The major advantage of the Starlock fitting is 100% power transfer of the machine through to the blade or sanding pad – resulting in faster cutting and reduced vibration.

What is the best oscillating blade to cut nails? ›

The DEWALT DWA4204 Titanium Nitride Coated Oscillating Blade is ideal for cutting wood with nails. This blade features a wide blade (1-3/4 in.) for fast material removal.

Can you sharpen oscillating tool blades? ›

The cost of OMT blades can add up so making them last longer and being able to re-sharpen them yourself can mean saving money. All that is required to re-sharpen is a saw file and a vise. I've found that the Imperial blades made of high-carbon steel are the easiest to re-sharpen and make for a very good value.

Why do my blades get dull so fast? ›

The harder the material a knife comes in contact with the faster it will dull. Avoiding contact with hard materials is the key to preventing premature dulling. There are a few places in your kitchen where a knife is likely to come in contact with something harder than itself.

What speed should an oscillating tool be? ›

Oscillation Rate and Angle

The higher the top speed, the faster the tool will cut. Look for at least 18,000 OPM. The higher the oscillation angle, the more aggressively it will cut.

How do you cut straight lines with an oscillating tool? ›

How to Cut Straight. To create a straight cut, a round or half-moon saw blade works best. You want to lightly press down on your tool creating a cut no more than 1/4 inch deep. Run your blade across the length of the cut multiple times with each pass making it a little deeper until you cut through your material.

What multi-tool do Navy Seals use? ›

What Multi-Tool Do Navy Seals Use? Navy Seals build specialized multi-tools on the basis of the Gerber Multi-Plier 600.

What is the best all around tool? ›

Top 11 Tool Sets
  • DEWALT Cordless Drill Combo Kit.
  • Craftsman V20 Cordless Drill Combo Kit.
  • Apollo Tools DT9706 Original 39-Piece General Repair Hand Tool Set.
  • Cartman 148-Piece Tool Set.
  • WORKPRO 408-Piece Mechanics Tool Set.
  • Taiker 49-Piece Garden Tools Set.
  • Scuddles Garden Tools Set.
  • JUMPHIGH Garden Tools Set.

What tool has the most uses? ›

Dental Tools. Behind the stainless steel screwdrivers/pliers/wrenches, the dental tools are the most used tools aboard.

What metal makes the sharpest blades? ›

Carbon steel knives are often the sharpest steel for knives. They're sharper and harder than stainless steel knives. An authentic carbon steel chef's knife is exceptionally sharp, but it is also vulnerable to chipping if not used correctly.

Are ceramic or steel blades better? ›

Stays sharper, longer - One of the biggest benefits of owning a ceramic blade is its tendency to stay sharper for extended periods compared to its steel counterparts. Also, ceramic blades tend to have sharper blades than stainless steel due to their hardness.

What type of blade is best for cutting bone? ›

Bandsaw blades produced from high quality steel, assuring the best performance in cutting bone in, boneless, fresh or frozen meat.

What blade stays sharp the longest? ›

The serrated blade makes it easy to cut through breads and foods with tough outer skin or crust. It is also the knife that stays sharp the longest on its own and can go longer intervals between each professional sharpening.

What is the world's sharpest cutting tool? ›

Since obsidian will fracture down to a single atom, it is claimed to have a cutting edge five hundred times sharper than the sharpest steel blade, and under a high magnification microscope an obsidian blade still appears smooth, whereas a steel blade has a saw like edge.

What blade angle is the sharpest? ›

Work Sharp Culinary tested thousands of kitchen knives to find the ideal edge for performance over durability and found 17 degrees to be our ideal edge across most knife and steel types, and 17 degrees is the go-to angle for all of our sharpeners (the E5 has an optional angle kit with 15 and 20 degree angle guides as ...

What is the most effective blade? ›

Many historians consider the gladius the deadliest sword in history, as it is estimated to have killed more people than any other blade.

What is the most versatile blade shape? ›


The drop point blade is used on many hunting and EDC knives, and performs well in most situations. It's the "Goldilocks" blade shape that's just right for most tasks. The strong tip and wide belly excel in meat processing, slicing tasks, and opening boxes from your latest knife purchase.

How thick is the sharpest blade? ›

Obsidian knife blades: overkill for slicing your sandwich. The thinnest blades are three nanometres wide at the edge – 10 times sharper than a razor blade. These are made by flaking a long, thin sliver from a core of obsidian (volcanic glass).

Which saw blade makes the smoothest cut? ›

A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.

Are Forrest saw blades the best? ›

Serious woodworkers count on American-made Forrest saw blades for smooth, quiet cuts, every time... without splintering, scratching or tearouts. No matter what your application, Forrest blades are simply the best money can buy. That's why discriminating craftsmen prefer them!

How many teeth on a saw blade is best? ›

Number of Teeth

For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy.

Which brands use Starlock? ›

Starlock blades

Furthermore, it also works well with tools with the universal dodecagon (12 point) mounting from other manufacturers. Fits ALL multi-cutters including Bosch, Makita, Fein, Metabo, Hitachi, AEG, Milwaukee, Ryobi, Skil and Einhell.

What is the difference between Fein Starlock and Starlock Plus? ›

Starlock blades can be used with ANY multi-cutter. StarlockPlus and StarlockMax blades require more power and are therefore limited to use with certain multi-tools. StarlockMax is the most powerful blade classification.

What are the four types of blades? ›

Different blades and their uses
  • Straight edge/bladed Knife. One of the more commonly used knives in the kitchen is also sometimes referred to as a flat ground edge. ...
  • Serrated edge. Another of the more commonly used knives in the kitchen. ...
  • Scalloped edge. ...
  • Hollow ground edge.

What is the most versatile cutting tool? ›

The table saw, in my opinion, is the most versatile tool in the shop and should be your first major purchase. Next up is the Miter Saw. The miter saw does one thing but it does it really well. The Miter saw will cross cut wood better and faster than pretty much any other tool.

Will oscillating tool cut a nail? ›

The bi-metal oscillating tool blades can be good for cutting nails and screws, and are especially good for jobs that involve cutting both wood and metal. If you are looking to make a straight cut into a piece of high quality metal, then you may want to go with semi-circular metal cutting blades.

Can an oscillating tool cut metal screws? ›

This Oscillating Metal Cutting Multi-Tool 3-Piece Variety Pack continues that tradition of quality. The kit consists of 3 blades. One, with carbide teeth and labeled Extreme Metal, is rated for cutting all types of metal, bolts, screws, metal pipe, cement board, plastics, PVC, and can also be used for grout removal.

Can an oscillating tool cut thick metal? ›

Fitted with the right oscillating multi-tool blades, your multi-tool can soon become a plumber or labourer's best friend. Set up as a multi-cutting tool, it can slice through plastic, copper or even galvanised metal piping with ease. Yes – multi-tools such as the Milwaukee M12FCOT-0 Cut Off Tool can cut through metal.

Can you use an oscillating tool as a grinder? ›

An oscillating multitool is a saw, scraper, sander, and grinder in one handy power tool.

How thick can an oscillating tool cut? ›

Q: How Deep Can An Oscillating Tool Cut Metal? Standard multitool blades can cut to a depth of 1.5-2 inches — meaning they can typically shear through pipes and screws in one pass.

Does a dull blade hurt more than a sharp one? ›

A dull blade is actually more dangerous to use than one that is sharp. Here's why: A dull blade requires more pressure to cut, increasing the chance that the knife will slip with great force behind it. A sharp knife "bites" the surface more readily.

Do sharper blades hurt less? ›

A sharp blade will be easier to control, leading to not only fewer injuries but less serious ones too. Injuries caused by a dull knife tend to be more traumatic because they tear the skin rather than cleanly slicing through.

Are all oscillating tool blades the same? ›

Oscillating multi tool blades come in a huge range of different sizes and styles. Simply check out our product descriptions on Toolstop to find out which material and applications they are best suited to.

How do I choose an oscillating multi-tool? ›

What to Consider When Choosing the Best Oscillating Tool
  1. Corded vs. Cordless. ...
  2. Power and Speed. Power could be a significant factor in choosing the best oscillating tool, depending on the intended use. ...
  3. Variable-Speed Control. ...
  4. Universal Accessories. ...
  5. Ergonomics. ...
  6. Noise and Vibration. ...
  7. Safety. ...
  8. Additional Features.
Feb 1, 2023

Are oscillating tools worth it? ›

The oscillating multi-tool is one of the handiest tools you can have around the jobsite or workshop. Its versatility lets you accomplish numerous tasks that would be impossible with other tools. You can sand; saw metal, wood, and drywall; make large holes; plunge cut into hardwood; or undercut a doorway.

Can oscillating tool cut pipe? ›

Cutting Copper Pipe with an Oscillating Multi-tool

Since many of them also use battery power, this makes them a new go-to power tool for cutting copper pipe. Oscillating multi-tools cut best with finer-toothed metal blades. The idea is that you can get in close and even flush cut to a wall.

Why is carbide blades better? ›

The main reasons a shop would switch to carbide band saw blades are longer life and faster cutting. The reason these blades can deliver such results is the carbide itself, a popular material for cutting tools because of its high durability and high heat resistance.

What is the difference between a segmented blade VS Turbo blade? ›

The Turbo rim cuts similar materials as the Segmented rim, but is able to do so faster due to the difference in its cut-outs. You'll typically get a better finish as well, but the Turbo rim won't cut through the hardest of materials that a Segmented rim will.

What to look for when buying an oscillating multi-tool? ›

Things to consider when buying a multi tool:
  • Oscillations per minute – the more oscillations per minute the faster the cutting speed.
  • Wattage – a higher wattage will aid particularly tough jobs.
  • Angle of oscillation – the greater the oscillating angle the quicker the cut.

Which cutting tools have the strongest strength? ›

Cemented carbide tool and cermet

Cemented carbide tools are extremely hard; they can withstand very high-speed cutting operation. Carbide tool does not lose their hardness up to 1000° C.

How long should a carbide blade last? ›

These blades are typically used for cutting through wood, but specially designed carbide blades can also cut through light-gauge metal. Carbide-tipped blades usually cost between $20 and $100 and can last from six months to a couple of years.

Is high speed steel better than carbide? ›

As mentioned earlier HSS has superior toughness over carbide, in the tapping process this really is most important.

What is the negative side of using carbide-tipped blades? ›

Carbide saw blades are optimal tools, but they are not cheap. Carbide is an extremely hard material, and it cuts through softer material with ease. But the downside to carbide is that it is very brittle and easy to damage.


1. Best Metal Cutting Blade? “Dry Cut” vs “Abrasive” vs “Diamond" Blade. Diablo, DeWalt, Makita
(Project Farm)
2. Best Multitool (TOOL KNIVES)? Leatherman vs Gerber, SOG, Victorinox, DeWalt, Mossy Oak, Ozark Trail
(Project Farm)
3. 8 New Tools From Amazon Will Help You In Your DIY Projects
(Chop Busters)
4. 14 Amazing Woodworking Tools Every DIYer Should See
(Wizilla Tech)
5. WOODWORKERS WISHLIST: Top 10 Tools for a Woodworking Shop
(Wizilla Tech)
6. Best Stud Finder? $262 Bosch vs $10 CH Hanson vs 9 Other Wall Stud Scanners! Let's find out!
(Project Farm)
Top Articles
Latest Posts
Article information

Author: Zonia Mosciski DO

Last Updated: 03/23/2023

Views: 5407

Rating: 4 / 5 (51 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Zonia Mosciski DO

Birthday: 1996-05-16

Address: Suite 228 919 Deana Ford, Lake Meridithberg, NE 60017-4257

Phone: +2613987384138

Job: Chief Retail Officer

Hobby: Tai chi, Dowsing, Poi, Letterboxing, Watching movies, Video gaming, Singing

Introduction: My name is Zonia Mosciski DO, I am a enchanting, joyous, lovely, successful, hilarious, tender, outstanding person who loves writing and wants to share my knowledge and understanding with you.